SYSTEM DESCRIPTION
3
21
8020065-ZLP4/2017-08-10|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
3.2
System components
The Master Data Analyzer consists of:
1. One
hand-held scanner
for scanning bar code information (only in the operating mode
with bar code scanning).
2. One set of rugged
electronic scales
with a
glass panel
for supporting the measuring
object.
3. One moving
measurement gantry
with two
pairs of light grids
for recording the
object’s dimensions and a wire draw encoder for calculating the length.
4. One
controller
for recording the measurement data and emitting the measurement
results to the customer’s system.
5. One
display
for visualizing the measurement results.
6. One
IP camera
(only for
MDA650 Image/MDA800 Image
).
7. One
stable mechanism
for holding the components
8. One
WLAN module
available as an accessory for mobile applications of the MDA.
Fig. 3: System components
1 – Hand-held scanner
In the operating mode with bar code scanning, the number used to identify the object is
detected using a wired hand-held scanner. The IDM26x hand-held scanner recognizes 1D
and 2D bar codes and all common stacked codes.
Fig. 4: Hand-held scanner
The hand-held scanner is connected to the MDA’s controller by a cable. This cable is used
to both supply the hand-held scanner with voltage and transmit data.
