SAFETY
2
13
8020065-ZLP4/2017-08-10|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
2.4.4
Dangers connected with handling of the device
The Master Data Analyzer has been designed and built in a way that allows for safe
operation. Protective devices reduce potential risks to the maximum possible extent.
Furthermore, the system has been subjected to an internal safety check.
However, certain residual risks apply in the event of misconduct or misuse.
Awareness of potential sources of danger in the Master Data Analyzer will help you to
work in a safer manner and thus prevent accidents.
That is why all persons involved with the transport and storage, mounting, commissioning
and decommissioning, operation, maintenance, and repair must carefully read and
observe the following safety notes.
In order to avoid danger, also follow the special warning information in the individual
chapters as well as the current national accident prevention regulations and any company
work, operation, and safety regulations.
2.4.4.1
Danger due to electrical current
HAZARD
Risk of injury due to electrical current
The Master Data Analyzer is connected to the power supply (AC 100 to 264 V/50 to 60 Hz).
Only a qualified electrician or trained person working under the guidance and supervision
of a qualified electrician is permitted to work on electrical systems or equipment, and they
must comply with the electrical regulations.
Improper handling of live devices may lead to severe personal injury or death by electric
shock.
Measures
▸
Electrical installation and maintenance work must only be performed by electrically
qualified personnel.
▸
Standard safety requirements must be met when carrying out any work on electrical
systems or equipment.
▸
Do not touch any live parts.
▸
In the event of danger, immediately disconnect the device from the grid.
▸
Electrical connections may only be made or disconnected when there is no power in the
system.
▸
Only switch on the supply voltage when the connection tasks have been completed and
the wiring has been thoroughly checked.
▸
Only carry out maintenance and repair work when the power is off.
▸
Always use original fuses with the specified current rating.
