6
COMMISSIONING
8020065-ZSP4/2017-08-10|SICK
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
Subject to change without notice
56
4. Specify which interface is to be used for the configuration work. If, as shown in the
example, the configuration is to take place using an Ethernet cable, the check box
labeled
Ethernet communication (TCP/IP)
is automatically activated.
5. Confirm the following pages of the wizard by pressing
Next
each time and click
Complete
to finish configuring the search settings.
If the number ranges for the configuration PC and the MDA controller match, then the
controller is detected and displayed in the device list on the right-hand side.
The
MSC800 (MASTER_ANALYZER)
controller uses two ports (like all SICK devices).
Ports are part of the network address and can be used to establish various connections
between the devices. Port
2112
is freely configurable but port
2111
is a fixed port for
outputting data. It is used for device configuration.
Note
