SYSTEM DESCRIPTION
3
35
8020065-ZLP4/2017-08-10|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
3.5.5
Status indicators – Electronic scales
The scales display affixed to the controller housing only shows the measurement results
from the electronic scales.
The additional display is required if the MDA’s electric scales are to be operated in the
verified mode.
3.5.6
Status indicators – WLAN module
The WLAN module which can be added as an optional accessory has the following status
and diagnostics displays.
Fig. 24: Status indicators – WLAN module
Designation
Color
Status
Description
PWR
Green
On
Supply voltage is on
Flashing
Supply voltage is too low
Off
Supply voltage is not on
>>>
Blue/purple/red
Blue light
A WLAN connection has been established
Purple
The device is attempting to connect to
another WLAN device
Flashing blue Data transmission
Red
Fault
Off
LAN
Yellow
On
Ethernet link available
Flashing
Ethernet communication is active
Off
No Ethernet connection
Tab. 10: Status indicators – WLAN module
Quality
Four LEDs are located on the underside of the device which display different information
depending on the operating mode.
Designation
Color
Status
Description
Link quality
Green
On
A: Weak connection quality
A and B: Sufficient connection quality
A, B, and C: Good connection quality
A, B, C, D: Excellent connection quality
Tab. 11: Status indicators – WLAN module (quality)