Operating Instructions
ISD 230/260/280
Notes on this document
Chapter
1
© SICK AG · Auto Ident · Germany · All rights reserved
8 008 207/30-11-2001
7
1.1
Purpose
This document is a guide to the operation of the IR Data Transmission Systems
•
ISD 230 (0.2 ... 200 m; max. 38.4 kBd)
•
ISD 260 (0.2 ... 180 m; max. 0.5 MBd)
•
ISD 280 (0.2 ... 150 m; max. 1.5 MBd)
in their variants
•
System without heater
•
System with heater
This document provides information about
•
Configuration
•
Mounting and electrical installation
•
Startup
•
Maintenance
•
Exchanging the device
The systems will in this manual be referred to as the “ISD“, except where a dinstinction is
necessary.
1.2
Target audience
This document is intended for persons who are responsible for the following activities:
1.2.1
Mounting, electrical installation, maintenance and replacement
Electricians and service technicians.
1.2.2
Configuration and startup
Technicians and engineers.
1.3
Information content
This document contains all the information required for configuring, mounting, (electrical)
installing and starting up the ISD.
A series of step-by-setp instructions is provided for each of these activities.
The ISD is configured by jumpers and DIL switches.
For further information on the design of the system or on the data transfer technology in
general, please contact the Auto Ident devision at SICK AG.
1
Notes on this document
