![background image](http://html1.mh-extra.com/html/sick/isd-230/isd-230_operating-instructions-manual_1264545016.webp)
Operating Instructions
ISD 230/260/280 IR Data Transmission Systems
Chapter
4
© SICK AG · Auto Ident · Germany · All rights reserved
8 008 207/30-11-2001
16
Installation
4.1Installation sequence
•
Configure the units
•
Select the mounting locations for the units
•
Mount the units
•
Mount the AMS 50 connection modules
•
Align the units to each other
4.2
Preparations
4.2.1Configuring the units
Ø
Befor mounting the system, configure the units of ISD 230 as decribed in
Chapter
5.1 ISD 230 system, Page 22
or the units of ISD 260/280 system as described in
Chapter 5.2 ISD 260 and ISD 280 systems, Page 33.
Also prepare the electrical
connection.
4.2.2
Required components
•
2 units for each ISD system
4.2.3
Required accessories
•
For each unit one angle bracket no. 2 013 824 or one three-point bracket
no. 5 306 369 (recommended)
- or -
Alternatively, if the bracket is supplied by the user:
- Stable mounting device that allows the alignment of the units to each other to be varied
in the x and y axes as well as the fine adjustment of the units. The weight of an unit is
approx. 1 kg without connection cable(s)
- Max. 4 screws M 5 for one unit. The screw length depends on the wall thickness of the
bracket used. Depth of engagement in
CLV max. 10 mm
from housing surface
•
2 srews M 5 x 10 mm to mount an unit on the angle bracket. 3 srews M 5 x 10 mm
(included) to mount an unit on the three-point bracket
•
2 srews M 6 (included) to mount the angle bracket on the base. 4 srews M 6 (included)
to mount the three-point bracket on the base
•
AMS 50 connection module (not included in the scope of supply of the ISD)
•
Connection cables (not included in the scope of supply of the ISD)
4.2.4
Required auxiliary parts
•
Tool
•
For large distances a torch for alignment aid
4
Installation