![background image](http://html1.mh-extra.com/html/sick/isd-230/isd-230_operating-instructions-manual_1264545021.webp)
Operating Instructions
ISD 230/260/280
Chapter
4
© SICK AG · Auto Ident · Germany · All rights reserved
8 008 207/30-11-2001
21
Installation
Units in fixed and mobile stations (variable link):
1.
Mount the two units so that at a short distance the units are not horizontally or
vertically offset (reference markings)
Align both units in such a way that the opposite unit appears at the center of the
crosshairs as shown in a) in
Fig. 4-4
.
2. Then move the mobile station to the average and maximum distance in the application
(note technical limits) and align the two units in such a way that the opposite unit
appears at the center of the crosshairs as shown in b) in
Fig. 4-4
.
3. Perform fine adjustment across the entire path using the “Light path interrupted“ LEDs
on both stations, as described in
Chapter 6.1 Switching on the units/fine adjustment,
Page 43.
Both units at fixed stations (permanent link):
Ø
Align each unit in such a way that the opposite unit appears at the center of the
crosshairs, as shown in b) in
Fig. 4-4
.
Ø
Perform fine adjustment using the “Light path interrupted“ LED on both stations, as
described in
Chapter 6.1 Switching on the units/fine adjustment, Page 43.
4.4
Dismantling the system
1.
Switch off the supply voltage of the AMS 50 connection modules or the non-SICK
24 V DC supply voltage.
2. Pull the connector of the connection cables from the units after loosing the fixing
screws.
3. Unscrew the units from the mounting brackets.
In order to dispose off the units after final removal from service without damaging the
environment proceed as described in
Chapter 7.3 Disposal, Page 45.