Operating instructions
Chapter
4
ICR 84x Image Code Reader
Installation
8 010 961/0000/10-05-2005
©
SICK AG · Division Auto Ident · Germany · All rights reserved
4-7
Tip
In the default setting, the ICR does not output the values “PT“ or “CP“ in the reading result
of the host interface. If this is required to evaluate the result in the host, the values can be
included in the “reading data“ block of the output string using the CLV Setup program.
Configuring reading data:
1.
Select the D
ATA
S
TRINGS
tab.
2.
Click the R
EADING
DATA
field.
The dialog window E
DIT
P
ARAMETER
: TFS dialog box is displayed.
3.
Use the mouse to place the cursor before or after the “BC“ (bar code) placeholder.
4.
In the drop-down list box below it, click the parameter PT for 2-D codes or CP for bar
codes. PT or CP is added in the selected position in the input field.
5.
Confirm the dialog box with “OK“.
6.
Perform a download to the ICR. This is done by clicking
in the toolbar.
The D
OWNLOAD
P
ARAMETER
dialog box is displayed.
7.
Confirm the dialog box by selecting the P
ERMANENT
save option.
The ICR outputs the PT or CP value for each code in the reading result via the host
interface. The values are always multi-digit numbers located in the selected position in
the reading data.