SICK ICR 84x Operating Instructions Manual Download

Page: 129 / 182

Operating instructions

Chapter

ICR 84x Image Code Reader

Appendix

8 010 961/0000/10-05-2005

10-5

Updating program

There are two options for installing a new version of CLV Setup:

•

You can install the new version and still keep the old version (parallel installation)

– or –

•

You can install the new version over the old version (overwrite)

Installing new version and retaining old version:

If you want to install the new version and still keep the old version of CLV Setup, follow the

procedure described under Initial installation. When the program asks you for the target

directory, you must specify a

new directory

. Both versions of the software are then available

but may not be started simultaneously.

The configuration files "*.scl " (scanner configuration), "*.npj" (network project), "*.opj" (OTS

project) or "*.rpj" (redundant OTS project) of the old version can be used in the new version

and contain the ICR parameter sets as well as project data if serveal scanners had been

organized logically by projects. In order to do so, copy the configuration files from the "data"

directory of the old version to the "data" directory of the new version.

Installing new version over old version:

Before you can install the new version of the software, you must remove the files of the old

version – with the exception of the configuration files "*.scl " (scanner configuration), "*.npj"

(network project), "*.opj" (OTS project) or "*.rpj" (redundant OTS project). They contain the

ICR parameter sets as well as project data if serveal scanners had been organized logically

by projects.

The uninstaller of the old version removes the program files. Using the uninstaller

you can remove all of the files (with the exception of the configuration files) or only selected

files. The default setting is a complete uninstall (the configuration files are not deleted). With

the custom uninstall, the files are listed and only selected files are uninstalled. If you choose

this uninstall method, ensure that the main directory containing the configuration files “*.scl“

is not deleted. We recommend that you move these files to another main directory and copy

them back to the “data“ directory later.

From the Windows Start menu, select P

ROGRAMS

and the uninstaller for CLV Setup.

The uninstaller starts and guides you step by step through the uninstall

procedure.

Select the uninstall method (complete or custom).

Install the new version of CLV Setup as described under

“Initial installation“

. Select the

same directory.

The new version of CLV Setup is installed. The configuration files of the old version can be

used again.

Summary of Contents for ICR 84x




















































































































































































Search results

Summary of Contents for ICR 84x

Reviews:

Related manuals for ICR 84x

Brands by name

Popular brands

SICK ICR 84x, Operating Instructions Manual

Search results

Summary of Contents for ICR 84x

Reviews:

Related manuals for ICR 84x

Brands by name

Popular brands