manualshive.com logo in svg

SICK ICR 84x, Operating Instructions Manual

Share
Download
SICK ICR 84x Operating Instructions Manual Download Page 70

Chapter

 6

Operating instructions

ICR 84x Image Code Reader

6-16

©

 SICK AG · Division Auto Ident · Germany · All rights reserved

8 010 961/0000/10-05-2005

Operation

ImageFTP displays the following markings for the DataMatrix code:

•

Violet line (dot and dash line): detected CP limitations (limitation of the evaluation range 

in the image memory)

•

Green line: detected DataMatrix code (Good Read)

•

Red line: areas with DataMatrix codes

•

Blue line (vertical): position of the DataMatrix decoder at the end of the reading pulse

For further marks, also for bar codes, see 

Chapter 6.5.3 “Image Acquisition“, Page 6-36

.

Fig. 6-22:  ImageFTP: Image output, with the markings for CP limitations (violet), the 2-D symbol 

(green) and the position of the DataMatrix decoder at the end of reading pulse (blue) 

Summary of Contents for ICR 84x























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands