![background image](http://html.mh-extra.com/html/sick/clp-100/clp-100_operating-instructions-manual_1264218007.webp)
Operating Instructions
Chapter
3
CLP 100 Bar Code Reader
Product description
8 008 912/0000/21-08-2002
©
SICK AG · Division Auto Ident · Germany · All rights reserved
7
2.5
Environmental information
The CLP 100 is designed so that it harms the environment as little as possible. It does not
contain or emit any substances harmful to the environment and is not a source of faults for,
for example, coating wetting in paint shops.
The maximum power consumption of the CLP 100 amounts to 2 W.
2.5.1
Disposal after final removal from service
Dispose of unusable or irreparable devices in accordance with the respective state
regulations on waste disposal in a manner compatible with the environment. The CLP 100
design allows it to be separated into recyclable secondary raw materials (housing) and
hazardous waste (electronic scrap).
Also refer to Section 7.3, Page 27
. At present, SICK AG
does not take back devices which have become unusable or irreparable.
3
Product description
3.1
Design
3.1.1
Scope of delivery
The
packing
of the CLP 100 contains the following:
•
One bar code reader CLP 100
•
One information sheet (notes on device) with connection diagram and Quick-Start
Depending on the
number of devices ordered
one or more of the following are included:
•
These CLP 100 operating instructions in English and German
•
A set of DOS-formatted diskettes (3.5") containing the CLP Setup operating software for
Windows
™
, the CLP Setup Help on-line help system and the HTML browser I-ViewPro
™
3.1.2
Variants
At present the CLP 100 is available in the following variants:
3.1.3
System requirements
The following are required to start-up and operate the CLP 100:
•
A public supply system device with an output voltage of 5 V DC
±
5 % in accordance with
IEC 742 (functional extra-low voltage) and at least 2 W power output
•
In the case of external reading pulsing via the "Sensor" switching input: A suitable sensor
for signaling an object with bar code, for example, a reflection photoelectric switch
•
A PC with Windows 95
™
, Windows 98
™
or Windows NT
™
and a serial interface
("COM x" port)
•
An RS-232 data connection cable (TxD and RxD transposed)
•
In order to use a CLP Setup Help on-line help system an HTML browser, for example,
Netscape Navigator
™
or the enclosed I-ViewPro
™
(
refer to Section 3.1.1 Scope of
)
Device
Light emission
Connection
CLP 100-0010
Front
9-pin D-Sub plug
CLP 100-2010
Side
9-pin D-Sub plug
CLP 100-0110
Front
Open cable end
CLP 100-2110
Side
Open cable end
Tab. 3-1: Variants of the CLP 100