SICK CLP 100 Operating Instructions Manual Download Page 5

Page: 5 / 44

Operating Instructions

Chapter

CLP 100 Bar Code Reader

Notes on this document

8 008 912/0000/21-08-2002

Notes on this document

1.1

Function

This document instructs you on using the CCD bar code reader CLP 100.

It contains information on

•

Device installation and electrical installation

•

Startup

•

Operation and configuration (parameterization)

•

Maintenance

1.2

Target audience

The target audience for this document consists of electricians, service technicians and

engineers.

1.3

Information content

This document contains all the information required for the installation, electrical installation

and startup of the bar code reader CLP 100 with the

default setting in our works

All actions are described step-by-step.

Parameterization of the CLP 100 for the

application-specific reading configuration

carried out with the CLP Setup user interface. Installation and use of the software are

described in the appendix.

Further information on the construction of the bar code reader as well as the bar code

technology can be obtained from SICK AG, Auto Ident Division.

1.4

Symbols used

Some information in this document is emphasized.

Note

A "Note" informs on exceptional features.

Recommendation

A "Recommendation" provides information on how to carry out an action optimally.

Hint

A "Hint" explains the setting possibilities in the CLP Setup software.

HIS

FONT

characterizes a term used in the user interface of the CLP Setup software (for

example, menu item, tab card).

Safety information

2.1

Authorized users

The CLP 100 must be installed and operated by qualified personnel in order to ensure that

it functions correctly and safely. The following qualifications are required for the various

activities:

Installation and maintenance

•

Practical electrical training

•

Knowledge of the common safety instructions at the workplace

Summary of Contents for CLP 100













































Search results

Summary of Contents for CLP 100

Reviews:

Related manuals for CLP 100

Brands by name

Popular brands

SICK CLP 100, Operating Instructions Manual

Search results

Summary of Contents for CLP 100

Reviews:

Related manuals for CLP 100

Brands by name

Popular brands