User manual GC600-GC600
Mains
9
Signalling
Function
Ref. 2b
Flashes at 25% ON if open after a closing command.
Flashing at 75% ON if closed after an opening command.
Ref. 2b
BUSLIVE
Signals
BUS
line ON.
Signals BUS line OFF.
Flashing at 50% if the
BUS
line voltage is outside tolerance
range.
GC600
Flashing at 50% during synchronization phase (alternate
to
GCB
) or during the back-synchronization phase (alone).
GC600
Mains
Flashing at 50% during synchronization phase
(alternate to
GCB
) or during the back-synchronization phase
(alternate to
MCB
).
Ref. 2b
GCB
The GCB switch is opened.
The GCB switch is closed.
Flashes at 25% ON if open after a closing command.
Flashing at 75% ON if closed at opening command (it flashes
alternate to
BUS LIVE
).
6.4
The back-light lamp is managed by the Gen-set control module, which switches off the back light after
a programmable time (
P.492
) if no buttons are pressed in the meantime. Press any button to switch the
lamp ON again, (we recommend using the
Esc/SHIFT
button as it has no function when used
alone). It is possible to deactivate the automatic power-off bringing the parameter
P.0492
to 0.
Depending on the environmental temperature conditions, the contrast may require adjustment to view
the display correctly.
Press in sequence the Esc/SHIFT
LEFT
to reduce the contrast (lighten), press the
Esc/SHIFT
RIGHT
to increase it (darken).
