12 User manual GC600-GC600
Mains
In some pages, pressing the
Esc/SHIFT
button replaces the upper status bar with a
System
Status
message all the time the button is held down. By double clicking the
Esc/SHIFT
button,
the upper status bar is replaced with a
System Status
message so long as you remain on that page. If
the message is unavailable, the bar is cleared and restored when the button is released.
6.5
WARNING! Assigning an incorrect value to one or more parameters can cause malfunctions,
damage to things or injury to people. The parameters must only be changed by qualified
personnel. Parameters may be password protected (see par. Access codes) Access codes).
This mode allows the display and change of the programming parameters.
Each programming parameter
Ref. 3
has a 4-digit numeric code (e.g.
P.0133
) to identify the variables
regardless of the language used. The current value of the parameter is displayed below the description
Ref.4
.
The first line
Ref.2
under the top status bar allows to identify the present menu by means of the
identification number of the menu and by the associated text. A pair of numbers is displayed on the right
of this line (
2/07
in the example in
fig. 5)
. The first indicates which entry in the menu is selected or
which page is displayed, the seconds indicates how many entries or pages can be displayed in the
current menu/submenu.
Pressing
ESC/SHIFT
button, the first line (1) is temporarily substituted with a status message.
Access to the parameters programming mode can be controlled by 3 different
PASSWORD
levels,
which are listed in order of priority.
1. SICES Password
2. Manufacturer Password
3. Installer Password
4. User Password
P.02 PROGRAMMING
1.2 Engine ____________ _2/07
0133-Engine rated speed (primary)
[1500]
______________________________________
Access level: manufacturer_
2
3
KEY:
1 - Status bar
2 - Current menu
3 - Current parameter
4 - Parameter value
5 - Access level
Fig. 5 - Display areas
1
4
5
