SOCIETA’ ITALIANA COSTRUZIONI ELETTRONICHE S.r.l.
VIA TAZIO NUVOLARI, n° 53 - 55061 CARRAIA - (LU)
W e b s i t e : w w w . s i c e t e l e c o m. i t
ISCRIZ. TRIBUNALE LUCCA N. 8661 - C.C.I.A.A. N. 103668
P. IVA 00871160461 - Tel. 0583 980787 - Fax 0583 981495
E - M a i l : i n f o @ s i c e t e l e c o m. i t
Tx/Rx Radio parameters:
Tx Freq.
- Transmitter frequency (MHz)
Rx Freq.
- Receiver frequency (MHz)
Tx Pwr
- Transmitted power (dBm)
Rx Pwr
- Received power (dBm)
CS
– Channel spacing between Tx and Rx (MHz)
Rem Rx Pwr
- Received power by the Far-End terminal of the link (dBm)
Tx Rate
– Net Data rate transmitted (link load) (Mbps)
Rx Rate
- Net Data rate received (link load) (Mbps)
QAM (tx)
–
Current Modulation Index used by the Transmitter
QAM (rx)
–
Current Modulation Index used by the Receiver
Note:
For Power measurements --- is displayed in case of signal below measuring threshold
Note:
the QAM index can have values 4 – 1024.
In case of Fixed Modulation the index is labeled “Fixed” and reports the operator’s setting.
In case of Adaptive Modulation the index reports the current value used by the system and it is labeled
“auto”.
2.7.2
Main Menu
In the left
Main Menu
area the following links (grouped in functional classes) are displayed and
can be used to open the relevant Variable Windows or perform the required operations by clicking
on the name:
Interfaces
Radio
– management of ODU Tx/Rx parameters (see par. 2.8)
Ethernet
– management of Ethernet User Network Interfaces available on the
system (see par. 2.9)
Equipment
System Settings
– management of system information (see par. 2.10)
Inventory and Housekeeping
– management of inventory information and
housekeeping interfaces (see par. 2.11)
Logs
– access to log files (see par. 2.12)
Statistics
– access and management of statistical counters to monitor traffic on
the system (see par. 2.13)
Performances
– access and management of counters and indicators
monitoring the quality of service (see par. 2.14)
Configuration Files
Backup
– create backup files of the system configuration (see par. 2.15.1)
Restore
– recover system configuration from the backup files (see par. 2.15.2)
External Links (par. 2.16)
Remote Terminal
–
allows to open and access directly the CT of the Remote
Terminal of the link (i.e. the equipment of the radio link located in the Remote
station). In case of 1+1 radio links, the Remote Terminal is defined as the
equipment of the remote station with the same protection role in the protection
group.
Mate Terminal
– available only in 1+1 HSB configuration. Allows to open and
access directly the CT of the Mate Terminal of the link (i.e. the equipment of the
radio link collocated in the same Local station)
Mate-Remote Terminal
– available only in 1+1 HSB configuration. Allows to
open and access directly the CT of the Mate-Remote Terminal of the link (i.e.
the Equipment of the radio link located in the Remote station and with the
opposite protection role in the protection group)
