SOCIETA’ ITALIANA COSTRUZIONI ELETTRONICHE S.r.l.
VIA TAZIO NUVOLARI, n° 53 - 55061 CARRAIA - (LU)
W e b s i t e : w w w . s i c e t e l e c o m. i t
ISCRIZ. TRIBUNALE LUCCA N. 8661 - C.C.I.A.A. N. 103668
P. IVA 00871160461 - Tel. 0583 980787 - Fax 0583 981495
E - M a i l : i n f o @ s i c e t e l e c o m. i t
Figure 2-11: Logs window
In the Log there are also reported “Micro Interruption Notification” messages which are inserted
when signal interruptions shorter than 1 sec. (which do not raise any alarm) are detected in the
received signal. The format of the message is the following:
“Radio Micro-interruption detected for xxx msec”
where xxx is the No. of msec when the signal was below the HighBER Alarm threshold in the last
second.
These messages have yellow background colour.
The Micro Interruption Notification can be Enabled [
√
]or Disabled [] clicking in the box
Microinterruption
at the bottom of the window.
To manage the Log three buttons are available at the bottom of the window:
<NoRefresh>/<Refresh>: Pressing the button the refresh of the window can be stopped or
re-enabled.
<Delete All>: all logger entries are cancelled.
<Export> : By pressing this button the window here below (Fig. 2.12) is displayed, allowing
to save the log on file on the CT PC. The file is formatted with Comma Separated Values
format which can be opened by most known spreadsheets applications.
The file name is:
Logs_<SysName>_<LocationName>_yyyy_mm_dd_hh.mm.ss.csv
Once the file has been downloaded, it can be processed opening the relevant application on PC.
