SICE Tech 4790786, Manual

Page: 14 / 155

21
x4
press and hold button 1
and meanwhile
press 4 times button 2
LED flashes
every 2 sec.
LED flashes fast
press the button
where you want
to memorise the code
ROLLING SIMPLE
x4
press and hold button 1
and meanwhile
press 4 times button 2
LED flashes
every 2 sec.
LED flashes twice LED flashes fast
press the button
where you want
to memorise the code
ROLLING COMPLEX (BFT MITTO)
x4
press and hold button 1
and meanwhile
press 4 times button 2
LED flashes
every 2 sec.
LED flashes twice fast LED flashes fast
press the button
where you want
to memorise the code
ROLLING COMPLEX (FAAC)
press the button
to copy
press the button
to copy
press buttons 1 and 2 of the
BFT transmitter (source code)
simultaneously **
press the button
to copy
while LED is flashing,
press the button
to copy
press both buttons
together and release
them when LED
flashes
*See compatibility list
IMPORTANT: CHECK THAT THE REMOTE CONTROL TO BE COPIED IS A MASTER.
By pressing any button, LED must emit a double flash instead of turning on immediately with a steady light.
WHY SYNC TECHNOLOGY
ACTION ON RECEIVER
REQUIRED
**In older versions, using one
pin press the hidden button at the back
of the transmitter
RECEIVER INSERTION
PROCEDURE*
RECEIVER INSERTION
PROCEDURE*
WHY SYNC TECHNOLOGY
ACTION ON RECEIVER
REQUIRED
DIRECT FUNCTION
RECEIVER INSERTION
PROCEDURE
COMPATIBLE RCs
COMPATIBLE RCs
2 1
3
4 5
2 1
3 4
5 6
2 1
3 4
6 7
5