SICE Tech 4790786 Manual Download Page 51

Page: 51 / 155

TM4

Cod.

6901139

Compatible with APRIMATIC TR2 and TR4 RCs

APRIMATIC

The duplication process should be carried out in the

immediate proximity of the receiver.

Press all the buttons on the original RC simultaneously. The

sound on the receiver will be activated indicating that it is

ready to learn a new RC.

Press all buttons on the new RC at the same time. The

sound indication on the receiver stops for a moment

(approx. 1.5 sec) and then resumes. Release the buttons.

Now press any button on the new RC. The sound is

interrupted for a moment (approx. 1.5 sec) and then

resumes.

IMPORTANT NOTE:

If the buttons are not pressed at the same time, the receiver

does not recognise the new RC.

433.92 MHz

Rolling code

DUPLICABLE THROUGH UNIVERSAL RCs

EVO

LITE

Summary of Contents for 4790786




























































































































































Search results

Summary of Contents for 4790786

Reviews:

Related manuals for 4790786

Brands by name

Popular brands

SICE Tech 4790786, Manual

Search results

Summary of Contents for 4790786

Reviews:

Related manuals for 4790786

Brands by name

Popular brands