80
CARDIN
The duplication process should be carried out in the
immediate proximity of the receiver CU.
1.
Use a pin to press the button located in the hole under the
buttons of the operating RC: release the button at the short
sound emitted by the CU.
2.
Instantly press the button on the operating RC unit: the CU
will emit another short sound.
3.
Press the button on the new RC that you want to encode:
the CU will emit 2 consecutive sounds.
4.
After releasing the button, the CU will emit a longer sound
than the previous ones. Wait at least 10 seconds and try to
open the gate with the fresh programmed RC. To duplicate
further RCs repeat the operation starting from point 1.
If the process is not successful or if errors are made during
programming, wait 20 seconds and start the programming
process again from point 1.
IMPORTANT NOTE:
If you keep the hidden button pressed for too long the RC enters battery
saving mode operating once every 3 times the button is pressed. To
exit this mode keep the hidden button pressed until LED on the Cardin
flashes quickly.
TXQ 449.200
Cod.
6900920
TXQ 449.400
Cod.
6900922
Compatible with S449.200/S449.300/S449.400, S437, Ballan S449 Cardin RCs
Hidden button
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
433.92 MHz
Rolling code FM
Summary of Contents for 4790786
