72
MITTO 2B
Cod.
6900939
MITTO 4B
Cod.
6900941
Compatible with MITTO 2/4A, Ghibli, Kleio e TCR2/TCR4 RCs
BFT
The duplication process should be carried out in the
immediate proximity of the receiver.
1.
Press buttons 1 and 2 of the source RC simultaneously for a
few seconds (until LED lights up).
2.
Press the button on the source RC.
3.
Within 10 seconds press buttons 1 and 2 of the new RC (to
be programmed) simultaneously for a few seconds (until
LED lights up).
4.
Press the button on the new RC (to be programmed) to
complete the learning process.
Wait at least 10 seconds and try to open the gate with the newly
programmed RC. To duplicate further RCs repeat the process
starting from point 1.
If the procedure is not successful or if errors are made during
programming, wait 20 seconds and start the programming
process again from point 1.
IMPORTANT NOTE:
In the old versions of Mitto 2 and Mitto 4 there is a hidden
button. In this case, pressing the first two buttons is replaced by
pressing the hidden button.
433.92 MHz
Rolling code
DUPLICABLE THROUGH UNIVERSAL RCs
EVO
LITE
Summary of Contents for 4790786
