Sibata 090860-0341, Operation Manual

Page: 28 / 44

- 26 -
After Ending Operation
When the START/STOP key is pressed, pump operation stops, and the integrated flow volume
screen is displayed.
* If an error occurs, the error No. is displayed and the operation display LED flashes (red).
Pressing the UP key switches the screen cyclically as follows: average flow volume → sampling time
→ setup screen of respective mode → integrated flow volume. Pressing the DOWN key switches
the screen in the reverse direction.
If an error code is displayed, see page 34 "Errors."
The (error code), integrated flow volume, average flow rate, and sampling time are collectively
called the "last data," and are displayed only in the operation mode that measurement was
last performed.
(For example, when operation was last performed in the down timer mode, the last data is
displayed only in the down timer mode and not in other modes, such as the manual mode.)
The last data is the same as LOG 0 in the memory function described on the following page.
Pressing the UP/DOWN key returns the screen to flow volume setting or other regular
screens.
Integrated flow volume
Average flow rate
Error code
Sampling time
This is displayed only
when an error has
occurred.
Normally, the screen changes to
display the integrated flow volume.
Setup screen of
respective mode