Sibata 090860-0341, Operation Manual

Page: 5 / 44

- 3 -
z
Do not allow this product to be directly splashed with water. Doing so might cause electric shock or
fire.
z
Do not subject this product to strong impact or drop it. Doing so might cause malfunction or
accidents.
z
Do not leave this product inside cars in the hot sun, or install or store it in strong direct sunlight, in
front of heating equipment or next to fires. Doing so might cause abnormal operation or
malfunction.
z
Never connect by methods other than those described in this manual, for example, by connecting
to connectors using wire or other metal. Doing so might cause fire or damage the hardware.
z
Never dismantle or modify this product. Doing so might cause malfunction or accidents.
z
If an abnormality occurs during operation, immediately stop operation and remove the cause of
the abnormality. When the abnormality is judged to be caused by this product, remove the battery
and contact your Sibata agent. Do not use this product in an abnormal state or allow it to be
dismantled for repair by non-service personnel. Doing so might cause malfunction or accidents.
z
Do not run this product wrapped in a cloth or bedding, or enclosed in a box. Doing so might cause
heat to build up, resulting in fire or malfunction.
z
Do not connect the power adapter to a multi-plug power strip. Doing so might cause electric shock
or fire. Before using this product on a non-specified voltage, contact your Sibata agent.
z
Do not use this product when the power cable is damaged or the plug inlet on the power outlet is
loose. Use in this state might cause fire or electric shock.
z
Do not touch the power cable or power outlet with wet hands. Doing so might cause electric
shock.
z
The service life of the LI-10KN is limited. Replace with a new LI-10KN when battery use becomes
increasingly shorter after each recharge. If this product is used beyond the LI-10KN's replacement
cycle, the battery might become damaged which will cause battery leakage.
z
This product is made for indoor use. Do not use it in environments that may be exposed to wind
and rain. Doing so might cause malfunction.
z
Do not block the exhaust port. Doing so will prevent the required airflow into the product, and
cause heat to build up inside, resulting in malfunction or fire.