Sib Geofiz Pribor SGD-TG, Operation Manual

Page: 42 / 46

Sib Geofiz Pribor Ltd

“to” — maximum permissible noise value;

“?” — result of comparison with a permissible noise value, “X” means a reject item;

“Rlkg” — leakage resistance;

“from” — minimum permissible leakage value;

“?” — result of comparison with a permissible leakage value, “X” means a reject
item;

“R” — DC resistance;

“from” and “to” — range of permissible resistance values;

“?” — result of comparison with a permissible resistance value, “X” means a reject
item;

“FN” — natural frequency;

“from” and “to” — range of permissible natural frequency values;

“?” — result of comparison with a permissible natural frequency value, “X” means a
reject item;

“Dmpg” — damping;

“from” and “to” — range of permissible damping values;

“?” — result of comparison with a permissible damping value, “X” means a reject
item;

“Sens” — sensitivity;

“from” and “to” — range of permissible sensitivity values;

«?» — result of comparison with permissible sensitivity values, “X” means a reject
item;

“THD” — total harmonic distortion;

“to” — maximum permissible THD value;

“?” — result of comparison with a permissible THD value, “X” means a reject item;

“Z” — string impedance;

“Tmsr” — temperature at the time of testing.
The self-diagnostics spreadsheet contains the following columns:

“Date” — self-diagnostics performance date;

“Time” — self-diagnostics performance time;

“THD” — total harmonic distortion of the Tester measuring channel;

“eTHD” — even harmonics;

“oTHD” — odd harmonics;

“?” —result of comparison with the maximum permissible THD value 0.2%, “X”
means a negative result;

“Offset” — DC offset of the Tester measuring channel;

“?” — result of comparison with the maximum permissible offset value 6.0 mV, “X”
means a negative result;

“Noise ”— inherent noise of the Tester measuring channel;

“?” — result of comparison with the maximum permissible inherent noise value 1.0
mV, “X” means a negative result;

“R” — measured value of the resistance of standard 1000 Ohm resistor;

“?” — result of comparison with the permissible range from 990 to 1010 Ohm, “X”
means a negative result;

“Rlkg” — measured value of the resistance of standard 10.0 MΩ resistor;

“?” — result of comparison with the permissible range from 9.5 to 10.5 MΩ, “X”
means a negative result;

“Z” — measured value of the impedance of standard 1000 Ohm resistor;

“?” — result of comparison with the permissible range from 990 to 1010 Ohm, “X”
42