Si-text trawl plot 12, User Manual, Page: 99 / 118

101 User Manual
- The C-COM is not connected or not connected correctly to the chart plotter.
- The C-COM module has not got a power supply.
- The serial port to which the link between the C-COM and the chart plotter is
made, is not the correct port, to which the C-COM should be connected.
A.2.1.3 The GSM SIM-card
The GSM SIM-card must be of a type which will allow data transfer. The
SIM-card must be inserted into the SIM-slot in the C-COM module. If the GSM SIM-
card need a PIN-code inserted, for the SIM-card to be activated, then this can be done
in the C-Forecast operation menu. The chart plotter does not accept deactivation of
the PIN-code.
A.2.2 INSTALLATION OF SOFTWARE
A.2.2.1 Registrations of user ID
The user identification number is a string of 16 characters and numbers “####-
####-####-####”. The character “-” is not a part of the code and is only used to make
the code more legible and is not to be inserted.
The code is supplied together with the subscription documents from C-MAP.
The registration code can only be used in one (1) chart plotter. The C-Forecast server
will associate the code and the chart plotter in which the code was first used. During
the connection start-up, the C-Forecast server will compare the registration informa-
tion and the code identifying the chart plotter and will only connect to a known
chart plotter.
Note
The Registration Code is contained in the chart plotter and after insertion can not be changed by the user.
However if the user whish to change the subscription, for the reason of change to an other chart plotter (for
example: change to and other model or change because of faulty chart) it is nessesary to contact C-MAP
directly in order to transfer the subscription to the new chart plotter.
A.2.2.2 Inserting the telephone number of the C-Forecast server
The telephone number through which the C-COM will make the connec-
tion with the C-Forecast server must be inserted in the menu part - C-Forecast set-up.
A.2.2.3 Activation of the serial port
Some chart plotters are build with more than one serial port, it is therefor
necessary to choose which port is to be used. The user can do this in the menu part -
C-Forecast set-up.