Si-text trawl plot 12, User Manual, Page: 81 / 118

83 User Manual
with Off (00). Using the Joystick select the number preferred and press 'ENTER'. The
default setting is 1.00 Nm.
5.3.4.3XTE Alarm
'MENU' + "ADVANCED" + 'ENTER' + "ALARMS" + 'ENTER' + "XTE Alarm" +
'ENTER'
Specifies the distance your Cross Track Error (XTE) can vary before the
sound of an alarm or disables the XTE Alarm (Off). After pressing 'ENTER' a box
will appear with 00. Using the Joystick select the number preferred and press 'EN-
TER'. The default setting is Off (00).
5.3.4.4Guard Zone Alarm
'MENU' + "ADVANCED" + 'ENTER' + "ALARMS" + 'ENTER' + "Guard Zone
Alarm" + 'ENTER'
The Guardian Zone Alarm is activated when the fix position gets closer than
a given range to any User Point. It is possible to set the alarm range (or disable it). To
insert the desired value use the Joystick , then press 'ENTER' to confirm. The default
setting is Off.
5.3.4.5Anchor Alarm
'MENU' + "ADVANCED" + 'ENTER' + "ALARMS" + 'ENTER' + "Anchor Alarm" +
'ENTER'
This function allows inserting of the limit of anchor dragging: beyond that,
the alarm is activated. The chartplotter computes the distance between the current
GPS position and the GPS position saved at the activation of the anchor alarm in the
menu. If the computed distance exceeds the value set in the menu, the chartplotter
shows the alarm message and starts the acoustic alarm. After pressing 'ENTER' a
box will appear with 00. Using the Joystick select the number preferred and press
'ENTER'. The default setting is Off (00).
5.3.4.6Depth Alarm
'MENU' + "ADVANCED" + 'ENTER' + "ALARMS" + 'ENTER' + "Depth Alarm" +
'ENTER'
Specifies the depth or disables the Depth Alarm. After pressing 'ENTER' a
box will appear with 00. Using the Joystick select the number preferred and press
'ENTER'. The default setting is Off (00).
5.3.4.7Timer Alarm Menu
'MENU' + "ADVANCED" + 'ENTER' + "ALARMS" + 'ENTER' + "Timer Alarm" +
'ENTER'