Si-text trawl plot 12, User Manual, Page: 80 / 118

82 User Manual
5.3.3.2Heading
'MENU' + "ADVANCED" + 'ENTER' + "SIMULATION MODE" + 'ENTER' +
"Heading" + 'ENTER'
To start the simulator you can insert the Heading value. Using the Joystick
select the preferred Heading and press 'ENTER'. The default setting is 000° M.
5.3.3.3Date and Time
'MENU' + "ADVANCED" + 'ENTER' + "SIMULATION MODE" + 'ENTER' + "Date"
+ 'ENTER'
'MENU' + "ADVANCED" + 'ENTER' + "SIMULATION MODE" + 'ENTER' +
"Time" + 'ENTER'
Using the Joystick insert the preferred Date and Time and press 'ENTER'.
5.3.3.4Cursor Control
'MENU' + "ADVANCED" + 'ENTER' + "SIMULATION MODE" + 'ENTER' + "Cur-
sor Control" + 'ENTER'
Enables (On)/disables (Off) the cursor control. The default setting is Off.
5.3.3.5Simulation Mode
Once the settings are selected, turn on the Simulator:
'MENU' + "ADVANCED" + 'ENTER' + "SIMULATION MODE" + 'ENTER' + "Simu-
lation Mode" + 'ENTER' + "On" + 'ENTER'
To turn On the Simulation select Off. The default setting is Off.
5.3.4 ALARMS MENU
The chartplotter provides alarm settings for various functions. Here you can
set the system for your navigational requirements.
'MENU' + "ADVANCED" + 'ENTER' + "ALARMS" + 'ENTER'
5.3.4.1Auto Off
'MENU' + "ADVANCED" + 'ENTER' + "ALARMS" + 'ENTER' + "Auto Off" +
'ENTER'
You can enable (On) or disable (Off) the automatic shutdown of the alarms
when the alarm condition disappears. The default setting is On.
5.3.4.2Arrival Alarm
'MENU' + "ADVANCED" + 'ENTER' + "ALARMS" + 'ENTER' + "Arrival Alarm" +
'ENTER'
Specifies the radius of a circle around the Waypoint of a Route: when your
vessel reaches this circle the alarm sounds. After pressing 'ENTER' a box will appear