63
English
TM2 Bus VID
Represents the voltageof the throttled performance statethat will be initi-
ated when the on diesensor gose from not hot to hot.
Ø
The Choice: 0.8375V ~1.6000V.
Note: CPU support TM2, item appear.
Limit CPUID MaxVal
Set Limit CPUID MaxVal to 3,Should Be "Disabled" for WinXp.
Ø
The Choice: Disabled or Enabled.
Note: Some older O.S.'s (Win98,WinMe..) cannot handle a CPUID
MaxVal greater than 3. Please choose "Enabled" if you use one
of those O.S. If your O.S. is WinXP or Win2000, we suggest you
"Disabled" the item.
NX BIOS Control
When disabled, forces the NX feature flag to always return 0.
Ø
The Choice: Enabled or Disabled.
Hard Disk Boot Priority
This item allows you to select Hard Disk Book Device Priority.
Bios Write Protect
This item allows you to enable or disable the Bios Write Protect.
If you want to flash BIOS, you must set it [Disabled].
Ø
The choice: Enabled or Disabled.
Virus Warning
Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot
sector protection. If this function is enables and someone attempts to write
data into this area, BIOS will show a warning message on screen, and an
alarm beep.
Enabled
Activates automatically when the system boots up, causing a
warning message to appear when anything attempts to access
the boot sector or hard disk partition table.
Disabled
No warning message will appear when anything attempts to
access the boot sector or hard disk partition table.
Ø
The choice: Enabled or Disabled.
