8
English
@
Parallel Port Header-EXT. Printer Port (JP5)
A DB25 male parallel port header is located near the rear panel of the mainboard. The
header is used to connect a parallel port socket (PC8) to the mainboard. The parallel
printer port can be purchased from Shuttle as an optional accessory.
13
12
11
10
9
8
7
6
5
4
3
2
1
26
25
24
23
22
21
20
19
18
17
16
15
14
JP5
Pin Assignments (JP5):
1=P_-STB
2=P_-PPD0
3=P_-PPD1
4=P_-PPD2
5=P_-PPD3
6=P_-PPD4
7=P_-PPD5
8=P_-PPD6
9=P_-PPD7
10=P_-ACK
11=P_-BUSY
12=P_PE
13=P_SLCT
14=P_-AFD
15=P_-ERR
16=P_-INIT
17=P_-SLIN
18=GND
19=GND
20=GND
21=GND
22=GND
23=GND
24=GND
25=GND
26=KEY
Note : Before connecting your IR device, ensure the IR onboard pin alloca-
tion matches the IR device. Incorrect installation may damage your
IR device.
Step1 : Attach the 6-pin infrared device cable to JP8.
(Refer to the above diagram for IR pin assignment.)
Step2 : This mainboard supports IrDA and Normal transfer modes.
@
IR Connector (JP8)
JP8 supports IrDA tranfer devices. To enable IrDA transfer devices, install appropriate
IR connectors according to the instructions belows:
Pins Assignment:
1=NC
2=KEY
3=VCC
4=Ground
5=IrTx
6=IrRx
JP8
