25
English
4. Place the rack in the chassis.
Rack Clip
3B. Place the Serial ATA HDD power
cables in the rack clip located on
the underside of the rack mount.
Note : Refer to section 2.4.4-3A if installing an IDE HDD.
Refer to section 2.4.4-3B if installing a Serial ATA HDD.
3A. Place the IDE HDD and power
cables in the rack clip located on
the underside of the rack mount.
Note : As you insert the rack, use a small amount of pressure to pull the
tuner card away from the rack. Release the tuner card and ensure
that the rubber knob sits firmly between the rack and the tuner card
to avoid power shorts.
Rack Clip
