37
ATX Power Supply Connector (ATX)
Locate the 20-pin male header ATX power connector (ATX) on your
mainboard. Plug the power cable from the ATX power supply unit directly
into the ATX power supply connector.
Note 1:
The ATX power connector is directional and will not go in unless the
guides match perfectly making sure that pin#1 is properly positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place to
ensure a solid attachment.
Note 3:
Your ATX power supply must be supplied to ACPI +5V standby power
and at least 720mA compatible.
Note 4:
Make sure your power supply have enough power for higher speed
processor installed.
Cooling Fan Connectors for CPU (JFAN1), System (JFAN2)
The mainboard provides two onboard 12V cooling fan power connectors to
support CPU FAN (JFAN1), System FAN (JFAN2).
E1
E2~E3
ATX
GND
+12V
SENSE
Note:
Both cable wiring and type of plug may vary depending on the fan maker.
Keep in mind that the red wire should always be connected to the +12V header, and
the blackwire, to the ground (GND) header.
