57
Primary/Secondary Master/Slave PIO
Each channel supports a master device and a slave device. These four
items let you assign which kind of PIO (Programmed Input/Output) is
used by IDE devices. You can choose Auto, to let the system auto
detect which PIO mode is best, or you can install a PIO mode from 0-4.
Ø
The choice: Auto, Mode 0,1 ~4.
Pimary/Secondary Master/Slave UDMA
Each channel supports a master device and a slave device. This
motherboard supports UltraDMA. UltraDMA technology provides faster
access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate
item on this list to Auto. You may have to install the UltraDMA driver
supplied with this motherboard in order to use an UltraDMA device.
Ø
The choice: Auto, Disabled.
Init Display First
If install both PCI and AGP display card , use this item to define one as
primary display adapter.
Ø
The choice: PCI Slot, Onboard.
Onboard FDD Controller
This option enables onboard floppy disk drive controller.
Ø
The choice: Enabled, Disabled.
Onboard Serial Port 1
This option is used to assign I/O address for onboard serial port.
Ø
The choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto, or
Disabled.
Onboard IR Port
This option is used to assign I/O address for onboard IR port.
Ø
The choice: Enabled, Disabled.
