62
Ø
The choice: V/H SYNC + Blank, Blank Screen, DPMS Support.
MODEM Use IRQ
If you want an incoming call on a modem to automatically resume the
system from a power-saving mode, use this item to specify the interrupt
request line (IRQ) that is used by the modem. You might have to con-
nect the fax/modem to the mainboard Wake On Modem connector for
this feature to work.
Ø
The choice: NA, 3, 4, 5, 7, 9, 10, 11.
Soft-Off by PWRBTN
Under ACPI (Advanced Configuration and Power management Inter-
face) you can create a software power down. In a software power
down, the system can be resumed by Wake Up Alarms. This item lets
you install a software power down that is controlled by the normal
power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to “De-
lay 4 Sec.” then you have to hold the power button down for four
seconds to cause a software power down.
Ø
The choice: Instant-Off, Delay 4 Sec.
*** Wake Up Events ***
Wake Up Events can prevent system from entering a power saving
mode or can awaken system from such a mode. In effect, system re-
mains alert for anything which occurs to a device that is configured as
On or Enabled, even when system is in a power down mode.
Wake Up Events
This item allows user to determine wake up events.
Ø
The choice: Press “Enter” key to run into the sub-menu.
