51
Boot Other Device
System at start up time will search all other possible locations for an
operating system if it fails to find one in the devices specified under the
first, second, and third boot devices.
Ø
The choice: Enabled, Disabled.
Swap Floppy Drive
If you have two floppy diskette drives in your system, this item allows
you to swap the assigned drive letters so that drive A becomes drive B,
and drive B becomes drive A.
Ø
The choice: Enabled, Disabled.
Boot Up Floppy Seek
If this item is enabled, it checks the geometry of the floppy disk drives at
start-up time. You don’t need to enable this item unless you have an old
diskette drive with 360K capacity.
Ø
The choice: Enabled, Disabled.
Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your
system is started.
Ø
The choice: On, Off.
Gate A20 Option
This item defines how the system handles legacy software that was
written for an earlier generation of processors. Leave this item at the
default value.
Ø
The choice: Fast, Normal.
Typematic Rate Setting
If this item is enabled, you can use the following two items to set the
typematic rate and the typematic delay settings for your keyboard.
Ø
The choice: Enabled, Disabled.
Typematic Rate (Chars/Sec)
If the item Typematic Rate Setting is enabled, you can use this item to
define how many characters per second are generated by a held-down
key.
Ø
The choice: 6, 8, 10, 12, 15, 20, 24, 30.
