Shuttle MV21 User'Smanual Download Page 70

Page: 70 / 73

Hardware Monitor

Current CPU Temp.

The mainboard supports CPU temperature monitoring and overheat

alert. This item indicates the current Processor temperature.

Current System Temp.

The mainboard supports System Temperature monitoring and overheat

alert. This item indicate the current main board temperature.

Current CPUFAN1/2 Speed

The mainboard can detect fan’s rotation speed for CPU cooler.

Vcore

This mainboard supports CPU and mainboard voltages monitoring. The

onboard hardware monitor is able to detect the CPU voltage (Vcore)

and the voltage output from power supply.

2.5V, 3.3V, 5V, 12V

The mainboard supports CPU and mainboard voltages monitoring. The
onboard hardware monitor is able to detect the voltages output of the

voltage regulators and power supply.

Summary of Contents for MV21










































































Search results

Summary of Contents for MV21

Reviews:

Related manuals for MV21

Brands by name

Popular brands

Shuttle MV21, User'Smanual

Search results

Summary of Contents for MV21

Reviews:

Related manuals for MV21

Brands by name

Popular brands