- 60 -
IRQ/DMA Resources
When resources are controlled manually, assign each system interrupt a
type. depending on the type of device using the interrupt.
IRQ3/4/5/7/9/10/11/12/14/15 assigned to
This item allows you to determine the IRQ assigned to the ISA bus and
is not available to any PCI slot. Legacy ISA for devices compliant with
the original PC AT bus specification, PCI/ISA PnP for devices compliant
with the Plug and Play standard whether designed for PCI or ISA bus
architecture.
Ø
The choice: Reserved, PCI Device.
DMA 0/1/3/5/6/7 assigned to
These items allow you to determne the DMA assigned to the ISA bus
and is not available for PCI slot.
Ø
The choice: Legacy ISA, PCI/ISA PnP.
PCI/VGA Pallete Snoop
This item allows you to access the memory that over 64MB in OS/2.
Ø
The choice: Non-OS2, OS2.
Assign IRQ for VGA
This item allows the user to set VGA IRQ Routing table Enabled or
Disabled.
Ø
The choice: Enabled, Disabled.
Assign IRQ for USB
This item allows the user the option to assign an IRQ to on-board USB
controller. Since the on-board controoler is always enabled, if no IRQ is
assigned to it, there will be a question mark report on the system device
under Windows 95/98.
Ø
The choice: Enabled, Disabled.
