- 35 -
ATX Power Supply Connector (J5)
Locate the 20-pin male header ATX power connector (J5) on your
mainboard. Plug the power cable from the ATX power supply unit directly
into J5 ATX power supply connector.
Note 1:
The ATX power connector is directional and will not go in unless
the guides match perfectly. Make sure the pin#1 is properly
positioned.
Note 2:
Make sure the latch of the ATX power connector clicks into place
to ensure a solid attachment.
Note 3:
This mainboard requires an ATX power supply of at least 200 watts
with power good signal.
e7
