- 30 -
Hardware Reset Connector (RST)
Attach the 2-pin hardware reset switch
cable to the RST header. Pressing the
reset switch causes the system to restart.
HDD LED Connector (HDLED)
Attach the connector cable from the IDE
device LED to the 2-pin HDD LED header.
The HDD LED lights up whenever an IDE
device is active.
Green LED Connector (GLED )
The Green LED (GLED) indicates that the
system is currently in one of the power
savings mode (Doze/Standby/Suspend).
When the system resumes to normal
operation, mode, the Green LED will go
off. Attach a 2-pin Green LED cable to
GLED header.
EPMI Connector (EPMI )
Hardware System Management Interface
(EPMI) header may attach to a 2-pin mo-
mentary switch. Press the EPMI switch to
force the system into power savings mode;
press again to resume normal operation.
c1
c2
c3
c4
