- 58 -
PM Control by APM
If this item set to
No
, system BIOS will be ignored and APM calls the
power to manage the system.
If this item setup to
Yes
, system BIOS will wait for APM's prompt
before it enter any PM mode e.g.
DOZE, STANDBY
or
SUSPEND
.
Ø
The choice: Yes, No.
Video Off Option
Thisitem define when to activate the video off feature for monitor
power management.
Ø
The choice: Suspend, Doze, N/A.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank
This selection will cause the system to turn off
the vertical and horizontal synchronization ports and write blanks
to the video buffer.
Blank Screen
This option only writes blanks to the video
buffer
DPMS
Initial display power management signaling.
Ø
The choice: V/H SYNC + Blank, Blank Scrren, DPMS Support.
Modem Use IRQ
This item determines the IRQ in which the MODEM can use.
Ø
The choice: 3, 4, 5, 7, 9, 10, 11, N/A
Soft-Off by PWRBTN
The setting of
Instant-Off
allows the ATX switch to function as a
normal system power off button when pressed for less than 4
seconds.The setting fo
Delay 4 Sec.
Allows the button to have a dual
function where to press the button for less than 4 seconds will place
the system in suspend mode, and pressing the button for more than 4
seconds will shut place the system off.
Ø
The choice: Instant-Off, Delay 4 Sec.
Wake Up Events
This item allows user to determine the wake up events
Ø
The choice:
