- 66 -
@
@
Save & Exit Setup
Pressing <Enter> on this itemc, below dialog shows up and asks you
for confirmation :
Save to CMOS and EXIT (Y/N)? Y
Pressing "Y" stores the selections made in the menus in CMOS - a
special section of memory that stays on after you turn your system off.
The next time you boot your computer, the BIOS configures your
system according to the Setup selections stored in CMOS. After saving
the values the system restarts again.
@
@
Exit Without Saving
Pressing <Enter> on this item , below dialog shows up and asks you
for confirmation :
Quit without saving (Y/N)? Y
This allows you to exit Setup without storing any change in CMOS.
The previous selections remain in effect. This exits the Setup utility and
restarts your computer.