S400 S600 Operator Manual 2009
Supreme Sander
7
To Install:
Fig. 1
1) Place the On Track Wheel on the shaft, so that the
BRASS NUT is on the RIGHT HAND SIDE when
looking at the wheel.
2) Center On Track Wheel on the shaft. Use your hex
allen key to tighten the hex allen screw on the BLACK
locking collar. Make sure that the BLACK locking
collar is tight against the wheel.
See Fig. 1
Fig. 2
3) With the special wrench provided, tighten
the BRASS NUT until the sandpaper (sanding belt)
is firm in place.
See Fig. 2
Fig. 3
To Replace Sandpaper Belt:
1)
Unscrew the BRASS NUT to the end of the
threaded shaft.
See Fig.3
Tools Required:
Special Wrench (included)
3/16: Hex Allen Key (not included)
ACCESSORIES
WARNING:
Eye protection should always be worn by the operator
and others in the work area when using the accessories
supplied with the Supreme Sander. Eye protection is
required for protection from flying debris and dust,
which could cause eye injury.
ON TRACK WHEEL
