2
SUPREME SR-450 / SR-452 FINISHER
INTRODUCTION
The Supreme Finisher is a compact, durable machine designed for fast, complete
finishing work. It will deliver efficient, dependable service when used correctly
and with care. As with any piece of specialized equipment, for best performance
the manufacturer’s instructions must be followed.
BEFORE USING THE SUPREME FINISHER, BE AWARE OF THE
FOLLOWING:
Approved EYE PROTECTION should always be worn by the operator and
others in the work area.
Always DISCONNECT ELECTRICAL SOURCE before adjustments or
servicing the Sander.
Make sure machine is PROPERLY GROUNDED.
Dust generated is FLAMMABLE – DO NOT SMOKE when using Sander.
Keep generators and covers IN PLACE and in proper working order.
After making adjustments, REMOVE WRENCHES before operating Sander.
NEVER leave machine running unattended – turn power off.
Observe all SAFETY WARNINGS on the machine and in this manual.
WARNING:
Eye protection should always be worn by the operator
and others in the work area when the Sander is in use.
Eye protection is required for protection from flying
debris and dust, which could cause eye injury.
OPERATING THE SUPREME FINISHER
