S400 S600 Operator Manual 2009
Supreme Sander
11
WARNING:
Dust from Sander is combustible. Do not smoke while
cleaning the machine and dust collector.
Damaged dust bag or dust drawer seals will allow the
escape of combustible materials causing a fire hazard
around the machine.
Check damaged parts. Before further use of a tool,
guard or other part that is damaged, check carefully to
determine that it will operate properly and perform its
intended function. Check for mounting or any other
condition that may affect its operation. A tool, guard or
other part that is harmfully damaged should be properly
repaired or replaced.
If the electrical cord, plug or wiring should become
frayed or damaged, replace it at once.
Replace all doors before operating the machine.
Do not operate machine with sander housing door open.
After making adjustments, remove all wrenches and
other tools before operating the Sander.
Use extra caution when starting the Sander for the first
time after installing a new tool or part.
MONTHLY MAINTENANCE
1.
Check the felt sanding pulley surface for any accumulation of dust. Clean
if necessary. Replace the wheel if worn.
2.
V-Belts – Check tension and adjust if necessary.
3.
Check for proper opening and closing of all dust dampers, removing and
cleaning any accumulation around the openings.
LUBRICATION
Your Supreme Sander is equipped with sealed bearings throughout, which
should be replaced if they ever wear out.
Other parts should not require any lubrication, only cleaning the parts is required.
