S400 S600 Operator Manual 2009
Supreme Sander
12
Lubrication will only attract dust and would be more harmful than helpful.
V-BELT ADJUSTMENT AND REMOVAL
All V-Belts on the Supreme Sander should be checked monthly for proper
tension and general condition. Loose V-Belts will decrease the power available
to the various tools and lower the efficiency of your Sander.
If you discover a worn or frayed belt, replace it now so it won’t break at an
inconvenient time.
WARNING:
Disconnect electrical power supply before working on
the machine.
TO CHECK V-BELT TENSION:
1.
Disconnect the electrical power supply.
2.
Check the tension of the V-belt running to the motor; it should depress
approximately ½” when pressed in the middle with moderate force.
3.
Rotate the V-belts by hand, visually inspecting the belts for damage.
4.
If tensions or conditions are bad, adjust tension or replace V-belt.
WARNING:
Do not over tighten V-belts, as to do so will cause rapid
belt wear and premature bearing failure.
After making adjustments, remove all wrenches and
other tools before operating the Sander.
MOTOR REPLACEMENT
WARNING:
Motor replacement requires working with electrical
wiring and can be hazardous. If you are not familiar with
electrical procedures, please call a qualified electrician.
