Shinko HR-700, Instruction Manual

Page: 121 / 124

120
11.3 Standard Setting Functions
11.3.1 Standard Setting Functions
Table 11.3.1 Standard Setting Functions
Function Description
Burnout
To deflect over toward 100 % with disconnecting input. Specifies every
channel’s burnout. (DC voltage of
50 mV max, TC input)
Tag Number
Sets a tag number by up to 5 figures per channel. (Printed at a logging
printing)
Reference Junction
Compensation
Specifies an inside/outside of the reference junction compensation.
Copy Function Copies a channel setting.
Input Offset Sets the input offset per channel.
Zone Recording
(Track Recording) Specifies a recording area per channel to separate the record into
Tracks.
Partial
Compression/Expansion
Records Partial Compression/Expansion to 1-crease line per channel.
Decade Recording Indication
Records and indicates by up to 5 decades. 2 digits are effective for
indication and printing.
Alarm Printing
Prints Occurrence time, Occurrence channel, alarm Setting No. and
Alarm type in purple when an alarm occurs.
Alarm Recovery Printing
Prints Recovery time, Recovery channel, alarm Setting No. and Alarm
type in purple when the alarm recovers.
Recording Start/Stop printing
Prints Time and Start/End comment when recording starts and stops.
Synchronous, Asynchronous or OFF can be selected.
Computation Computes Square root.
Interchannel Computation Computes Sum, Difference and Average values between channels.
Alarm Hysteresis Width Sets an alarm hysteresis width to 0 % FS or 0.5 % FS.
Digital Filter Records the first order lag with the filtering Process variable.
11.4 Optional Functions
11.4.1 Remote Function of DI
Function Description
Chart Feed Start/Stop
ON: Start, OFF: Stop
Changing Chart Speed
ON: 1st, OFF: 2nd
Comment Printing (Sync./Async.)
ON: Comment Printing
Manual Printing (Sync./Async.)
ON: Manual Printing
Date and Time Printing (Sync./Async.)
ON: Date and Time Printing
11.4.2 Alarm Output Function
3 relays
11.4.3 Communication Function
RS-232C (Standard)
RS-485 (Optional)