Shinko HR-700, Instruction Manual

Page: 66 / 124

65
7.1.3 Setting the Unit
Setting Items
Sets the input unit for each channel.
Operation
Example: Setting the unit ( ) for Channel 1
Press the “MENU” key for 3 seconds or longer to enter
setup mode. Use the key to display " ".
Then press the “ENT” key.
Use the key to select the desired channel. Then,
press the “ENT” key.
Use the or key to select the 1st character of the
code number, and press the “ENT” key.
(See the Character Code Table on the next page.)
Set the 2nd character in the same manner.
When the number of unit characters is less than 6, enter
the code ( ) to finish. Press the “ENT” key.
Press the “ENT” key. Setting is completed.
To return to user mode, press the “MENU” key for 3
seconds or longer.
[Note]
To change the unit in the range of , or , set the range to .
[Note]
The unit setting is effective only when the range setting is , , , ,
and (including , and when is selected as a range
setting of the reference channel).
For other range settings, the unit is automatically determined according to the range.
( )
( )
End
Setting Channel Code No.
MENU
ESC
3 sec
PRINT
ENT
FEED
PRINT
ENT
Display Operation Keys Description
PRINT
ENT
(Code No.)
FEED
PRINT
ENT
FEED PRINT
ENT
ENT
Char. No.