Shinko HR-700, Instruction Manual

Page: 86 / 124

85
(6) Recording Start/Stop Printing (OFF/Synchronous/Asynchronous)
Prints recording start and stop time on the chart paper.
For Recording Start/Stop printing, OFF, Synchronous or Asynchronous can be selected.
Example: Recording Start/Stop Synchronous printing
Enter engineering mode (See the Key Operation to Enter
Engineering Mode on page 76). Use the key to
display " ", and press the “ENT” key.
Use the key to select " ", and press the
“ENT” key.
Use the key to display " ", and press the “ENT”
key.
Once setting is completed, the recorder will return to the
Recording Start/Stop Printing Setting screen.
Selection item :
(Recording Start/Stop OFF) : Recording Start/Stop is not printed.
(Recording Start/Stop Synchronous printing) :
Recording Start is printed at preset chart speed. However, Recording Stop can be printed
regardless of the preset Chart feed speed.
(Recording Start/Stop Asynchronous printing) :
Recording Start/Stop is printed regardless of the preset Chart feed speed.
How to print Recording Start :
Press the REC key after recording stops.
Recording Start time will be printed automatically.
It will not be printed if “Recording Start/Stop “OFF” has been set.
How to print Recording Stop :
Stop recording by pressing the REC key for 3 sec or longer.
Recording Stop time will be printed automatically.
It will not be printed if Recording Start/Stop “OFF” has been set.
DI function :
If DI function is used for Recording RUN/STOP, Recording Start/Stop cannot be performed
using the REC key.
Perform Recording RUN/STOP using external DI terminals.
Printing sample :
ENT
PRINT
ENT
PRINT
ENT
ENT PRINT
Display Operation keys Description
Recording Stop printing
(e.g.) 2006.5.10 20:00
Recording Start printing
(e.g.) 2006.5.10 19:00
May.10.06 19:00Start
May.10.06 20:00End