Shinko HR-700, Instruction Manual, Page: 49 / 124

48
6.5 Changing the Display
Display selection procedure
(1) Press the “MENU” key to display " ", then press the “ENT” key.
(2) Use the “PRINT” key to select a required display from the menu below.
Then press the “ENT” key.
(3) " " is displayed for the manual display. Use the “PRINT” key to select a channel number,
then press the “ENT” key.
“ ”(AUTO): Auto display
“ ”(MAN): Manual display
“ ”(DATE): Date display
“ ”(TIME): Time display
“ ”(OFF): Display OFF
6.5.1 < Auto Display >
Indicates the process variable of each channel sequentially at intervals of 2.4 seconds.
(Data renewal period: 120 ms.)
6.5.2 < Manual Display >
Indicates the Process variable of the specific channel, and updates it every measurement
cycle (120 ms).
The data is the same as that of Auto display.
Pressing the “ENT” key changes to the next displayed channel number.
6.5.3 < Date Display >
Indicates the month and day. Leap year is adjusted automatically.
(e.g.) October 18
6.5.4 < Time Display >
Indicates the hour and minute.
(e.g.) 12:15
6.5.5 < Display OFF >
Turns off the process variable display. Key operation is the same as usual. To switch to other displays,
repeat steps (1) through (3) mentioned above.
Month Day
Hour Minute
Process Variable (5-digit)
Channel Number (1-digit)
H
H : Upper limit Alarm
L : Lower limit Alarm