Shinkawa VM-7 Series, System Manual, Page: 30 / 80

VM-7 System Manual Chapter 2 Description of the System
28
⑦
3ch monitor output
connector
Outputs 3ch input signal via the buffer amplifier.
⑧
3ch pulse output
connector Shapes 3ch input signal into rectangular wave to
output.
⑨
4ch monitor output
connector
Outputs 4ch input signal via the buffer amplifier.
⑩
4ch pulse output
connector Shapes 4ch input signal into rectangular wave to
output.
⑪
Module fastener
This is used to fix the
Network Communication
Module
to the instrument rack.
⑫
Sub board A board on which electronic parts are mounted
⑬ Main board A board on which electronic parts are mounted
⑭ DIN connector A connector used for connecting to the motherboard