Shinkawa VM-7 Series, System Manual, Page: 20 / 80

VM-7 System Manual Chapter 2 Description of the System
18
<Temperature Monitor Module (VM-704)>
The Temperature Monitor Module is a monitor that monitors the temperatures of rotating
machineries. A single module provides up to six channels for input, and can monitor the
temperature of six different locations on the machine. In addition, as an input transducer, the
module can also accommodate thermocouple, three-wire and four-wire resistance thermometer
sensors.
Also, this module provide the recorder output corresponding to input signals and contact output, to
outside equipment via the rear panel of the instrument rack.
No. Name Function
① 1ch OK indicator
When 1ch is normal: Lights (in green).
When 1ch warning is activated: Flashes.
②
2ch OK indicator
When 2ch is normal: Lights (in green).
When 2ch warning is activated: Flashes.
③ 3ch OK indicator
When 3ch is normal: Lights (in green).
When 3ch warning is activated: Flashes.
④ 4ch OK indicator
When 4ch is normal: Lights (in green).
When 4ch warning is activated: Flashes.
⑤
5ch OK indicator
When 5ch is normal: Lights (in green).
When 5ch warning is activated: Flashes.
⑥ 6ch OK indicator
When 6ch is normal: Lights (in green).
When 6ch warning is activated: Flashes.
⑦ Module fastener
This is used to fix the
Temperature Monitor Module
to the instrument rack.
⑧
Main board A board on which electronic parts are mounted