Shinkawa VM-7 Series, System Manual, Page: 12 / 80

VM-7 System Manual Chapter 2 Description of the System
10
No. Name Function
⑥
Contact input terminal
block
Performs the following according to contact inputs.
y Self-hold alarm reset
y
Activation of sequence function
y Activation of 10 pole high pass filter
⑦
System-OK output
terminal block Provides contact outputs according to OR of OK
alarm from each module.
⑧
Recorder output
terminal block Outputs the voltage or current signal proportional to
each module monitor range.
⑨
Analysis Module
communication
connector
Outputs data processed by the Analysis Module.
⑩
Network communication
connector 1
The measurement value and status of each monitor is
transmitted to the network via the Network
Communication Module installed on the Slot 1.
⑪
Network communication
connector 2
The measurement value and status of each monitor is
transmitted to the network via the Network
Communication Module installed on the Slot 2.
⑫
Local communication
connector Communicates with the PC in which MCL View and
FIELD CONFIG are installed.
⑬
Contact output terminal
block Outputs contact signals according to the logic related
to each module warning.
⑭
Power supply module
terminal block Supplies power and provides POWER-OK contact
output.